 |
| Violet Audio release the DX16XI and DX16XT at NAMM 08 |
|
violet |
|
 |
|
Melbourne, VIC, Australia - Jan 17, 2008:
In addition to the full range of Violet Audio products, the DX16XI and DX16XT multi-channel XLR audio splitter units will be on display at NAMM 2008.
Visitors are welcome Thursday Jan 17 - Sunday Jan 20 2008 at the Violet Audio stand, Hall A - booth#6809 Anaheim Convention Centre, CA, USA. |
| |
|
|
The DX16XI and DX16XT are high performance 16 channel 3 way audio signal splitter units. The DX16XI is a pure path split, whilst the DX16XT offers transformer isolated audio splits.
Primarily designed for microphone signals, the DX16XI and DX16XT are extremely flexible units suitable for use in live performance and recording environments where split audio feeds are required to be simultaneously distributed to the FOH, monitor console, and or recording engineer.
Connectivity is proved in the form of 16 XLR inputs and outputs on the front panel, with a further 32 channel outputs in the form of XLR and 25-pin D-Sub on the rear.
Entirely passive, neither the DX16XI nor DX16XT require a power supply. A sturdy 2RU metal chassis construction ensures maximum durability for the road or studio.
|
| |
>> go to the product page
>> download the press kit as zip here |
| |
|
|
| Violet Audio set to release the TST3, TSR3, and TSR12 "Trinity Install Series" products at NAMM 08 |
| |
|
|
 |
|
Melbourne, VIC, Australia - Jan 17, 2008:
In addition to the full range of Violet Audio products, the "Trinity Series" TST3, TSR3, and TSR12 products will be on display at NAMM 2008.
Visitors are welcome Thursday Jan 17 - Sunday Jan 20 2008 at the Violet Audio stand, Hall A - booth#6809 Anaheim Convention Centre, CA, USA. |
| |
|
|
The Trinity Series TST3, TSR3, and TSR12 are balanced audio connection transmission plates and receiver units designed especially to facilitate the connection and transmission of hi-quality audio over standard CAT 5 Ethernet cable in installation environments.
With the adoption of standard Cat 5 cable format, professional audio installers can now reduce both component and installation costs across the board.
Trinity Series Transmitter Plate
The TST3 is a wall mountable audio input connector plate. It features three (3) x combo audio input connectors on the front panel and a standard Cat 5 Ethernet output connector on the rear. All output signals are transmitted to a Trinity Series destination receiver unit.
Trinity Series Receiver Units
The TSR3 and TSR12 receiver units accept incoming audio data from the TST3 transmitter units and offer 3 or 12 channel balanced analog XLR outputs respectively.
The TSR3 is a compact 3 channel receiver perfect for use with one single TST3 transmitter, whereas the TSR12 is a 1RU standard 19” rack-mountable unit built to accept 12 channels of incoming audio from up to 4 x TST3 transmitter units.
All Trinity Series products feature hi-quality component selection and full metal chassis construction.
|
| |
|
|
|
|
| Copyright © 2010 Violet Audio. All Rights Reserved. |
|
